
![]() The high cycle lifetime battery for small traction applications… Maintenance Free and Sealed Each cell is sealed by a valve preventing penetration by airborne oxygen. Excess pressure (from overcharging is vented and the valve resets. Gas within the battery is recombined to form water. Therefore no water topping up or filling is needed and no acid spill will occur. Mistakes in maintenance are eliminated. Deep Discharge Resistant Batteries can survive deep discharges and still recover their capacity. Even after 4 weeks left flat the battery can recover to 80% after 48 hours recharging and to 100% after a few cycles. High Cycle Life Designed for high cyclic applications Safe for Transport Batteries comply with the Federal Office of Road Safety Schedule to ACA 94-03 when transported by road and with the IMDG paragraph for Airfreight. Wide Applications Dryfit Traction Block small traction applications in particular sensitive areas such as foodstuff industries, grocery stores, pharmaceuticals, dispatch areas and other clean rooms. Extremely low Self Discharge Less than 3% of the rated capacity per month in storage is lost at 20°C. This means batteries can be stored for long periods without recharging. Economical Excellent performance/price ratio and very low service costs. Traction Block Series Brochure PDF |