INTRODUCTION

The AP600 makes all the required power measurements for three phase generating or consuming electrical equipment. It is an entirely solid state system with no moving parts, and uses a microprocessor to measure voltage, current, and frequency, and calculate power consumption and power factor in real time. The measurements are displayed in large, bright red LEDs. The AP600 can be used in many applications such as:

a. Generator set output panel.

b. Load bank input monitor.

c. Industrial power supply monitor for machinery lines, industrial heating and other processes which consume electrical energy.

SPECIFICATIONS

Input voltage	0 to 350 V AC RMS, accuracy 1%
Input current	0 to 5 A AC RMS, accuracy 1%
Display frequency range	33.4 to 66.7 Hz, accuracy 0.1% when voltage is above 160V
Current ranges (Amps)	40.00	50.00	60.00	75.00
	80.00	100.0	125.0	150.0
	200.0	250.0	300.0	400.0
	500.0	600.0	750.0	800.0
	1000	1200	1400	1500
	1600	2000	2500	3000
	3500	4000	5000	6000
System power supply	190 to 350 V AC 50/60 Hz
System power consumption	5 W typical
Ambient temperature	0 - 60°C
Ambient humidity	10 - 90% non-condensing